“The AB731 Tamper Resistant Intercom with One Call Button Surface can easily be programmed to offer a number of different call functions”
for use with Pro700 system.
Features
- Built-in loudspeaker and microphone
- Indoor use
- 1 call button, moving steel key
- Easily programmable via internal switches
- Front plate is made of 2 mm stainless steel
- Built-in relay for control of camera, door lock, etc.
- External 20 Ohms loudspeaker can be connected
Tamper Resistant Intercom with One Call Button Surface – AB731 – Description
Operation
The call button can easily be programmed to offer a number of different call functions. The following calling alternatives are available.
1: Door-Bell Call
A signal is audible in the receiving stations when the call button is pressed in AB731. The call can be accepted in the receiving full keypad master stations, by pressing the “5” button. A total of 19 master stations (maximum) can receive this Door Bell call. If the Door-Bell call is not accepted within 30 seconds or 2 minutes, the door-bell call is automatically cancelled. This is a typical function for entrance control to a building with many receiving stations inside.
2: Call Request (CAS – Central Answering Service)
A signal is audible in the receiving stations when the call button is pressed in AB731. The call can be accepted in the receiving full keypad master stations by pressing the “0” button. A total of 3 master stations can receive this call request. The calling AB731 stations are queued until answered, with no time limits. A maximum of 19 AB731 stations can be queued. This is a typical function in a surveillance system with calls to one guard position.
3: Direct Call to Numbers 13, 19, 29, 39 or 49
The conversation can be limited to 30 seconds via switch programming if nobody is inside to answer the direct call. The call will then be automatically disconnected after 30 seconds.
4: Emergency Call
Press and hold the call button. All stations programmed to receive group call no. 2 will now receive the message. The connection is cancelled when the call button is released. The stations can receive incoming calls from all the other stations in the system.
Tamper Resistant Intercom with One Call Button Surface – AB731 – Description
GENERAL | |
|---|---|
| Total number of stations | 20 |
| Operating voltage | 12-27 VDC |
| Power consumption With external loudspeaker | Min. 30 mA Max. 200 mA 500 mA |
| Frequency range | 100 – 5000 Hz |
| Output | 3 W |
| Type of signalling | 32 kHz ASK |
| Volume control | 23 dB |
| Dimensions (D x W x H) | 60 x 130 x 220 mm |
| Max. cable length | 12 VDC: 100 m 18 VDC: 300 m 24 VDC: 500 m |
| Maximum permitted cable capitance | 87 nF |
| Material | Stainless steel |
| Cable connection | Screw terminals |
| CE certification | EN 50081-1 Radiation EN 50082-1 Immunity |
| ORDER NUMBER | DESCRIPTION | SHIP WEIGHT |
|---|---|---|
| 3007600009 | AB731 Tamper Resistant Station, 1 call button | 1.5 kg |
Vandal and Tamper Resistant Intercom Station Range
Intercom Station Range
| Description |
|---|
| Cleanroom & Operating Theatre |
| Control Room |
| Desk or Wall |
| Door |
| Heavy Duty Telephone |
| Turbine |
| Vandal and Tamper |
| IP, VoIP & SIP Station Range |
| Video and Touch Screen |
| Station Accessories |
For more information
If you seek professional advice on which product to select, don’t hesitate to contact RingUK’s specialists today. Our team will evaluate your requirements, research, and clarify all available options to assist you or your client in selecting the ideal system that satisfies your needs.